Single-Channel Multi-Loop Controllers

It's used to control temperature by a specified program in the step-by-step mode.

 

Features:

• Used to control temperature by a specified program in the step-by-step mode
• There are up to 16 programs of 12 steps each available to set
• The user sets for each program: number of a program, number of steps, start time, hysteresis and control period
• The user sets for each step: specified temperature, acceleration time, retention time, control law
• Three conditions to move to the next step: move by specified speed, move by specified time, move by minimum time
• Possibility of manual moving to the next step or program termination
• Non-volatile memory of all controller settings and program execution progress
• Mode of single time auto-adjust the PID by the whole program
• Different types of inputs:
• UN (all types of RTD and thermocouple temperature probes)
• АТ (analogue current 0-20 mА, 4-20 mА, 0-5 mА), AN (analogue voltage 0-10 V, 2-10 V)
• Accuracy 0,2 to 1,0 sec, quick action per a channel starting with 0,2 sec
• Scaling the input quantity, sensor error compensation, filtering the interference and instability of indications
• Access to controller configurations by password
• Normal and inverse hysteresis, setting output polarity, Cooler and Heater modes
• Different types of outputs:
• EZ (short-circuit electromagnetic relay 5 А 220 V АС/DC)
• EP (switching electromagnetic relay 5 А 220 V АС/DC)
• IV (voltage 12 V 20 mА DC)
• OS (optosymistor 220 V 50 mА АС)
• OK (open collector 40 V 30 mА DC)
• AV (current 4-20 mА, 0-20 mА, 0-5 mА)
• АМ (voltage 0-10 V, 2-10 V)
• Optionally RS output (RS485 output, no galvanic isolation, T-bus exchange protocol)
• Optionally additional EZ output (electromagnetic relay 1 А 220 V АС/DC) for alarm
• Models in C1 (96х96х75 mm) and E (96x96x91 mm) housing
• Power supply 90-242 V АС

 

Technical specifications

Application Form to order the product

Data Sheet

General Data Sheet