Temperature Probes

Immersion Temperature Probes are designed to measure the temperature of various environments in the temperature range -196...800 °С.

Air temperature probes are designed to measure temperature both indoors and outdoors. The sensor goes either in plastic or in aluminum enclosure.

Surface temperature probes are designed to measure surface temperature of solids in industrial environments, as well as the temperature in radiators and pipes of small diameters.

High temperature immersion probes are used to measure high temperature environments from 800 to 1200 °C. These models have protective heat resistant sheath and high temperature measuring sensors.

Explosion proof probes are designed to measure temperature of various environments in hazardous areas. Available with several types of protection: Intrinsically Safe Equipment, Explosionproof Equipment and Increased Safety.

This kind of temperature probes is designed according to customs' specifications. These are analogs of foreign and Ukrainian probes which have various applications.

This is the line of Y-case temperature transducers. It uses 4-20 mA analogue interface to transfer data, high-contrast OLED display to show data and external temperature probes to expand measuring zone.

This is the line of Y-case temperature transducers. It uses RS485 interface to transfer data, high-contrast OLED display to show data and up to two external temperature probes to expand measuring zone.

This is the line of Y-case temperature transducers. It uses ZigBee wireless interface to transfer data, high-contrast OLED display to show data and up to two external temperature probes to expand measuring zone.

Multizone temperature probes are designed to measure temperature gradients in containers, channel furnaces, dryers, reactors, etc.

Temperature transmitters are designed to transduce analogue signal of a transducer (RTD, thermocouple or thermistor) into unified analogue signal 4-20 mA or into digital signal by the RS485 interface.

Thermowells and threaded bosses are tubular fittings used to mount temperature probes into pipelines, tanks and other facilities. Hex fittings are designed for temperature probes having no a hex fitting.

Extension and thermocouple wires are used to connect temperature probes. There are various wire insulation types operating in the most extreme environments: high and low temperature, aggressive environment, bending, mobility, etc.

It's used to connect thermocouple and thermocompensating cables. Connector contacts are made of corresponding thermocouple alloys, that avoid any additional error in indications while measuring.

PJSC TERA supplies with production of The Heraeus Group (germany manufacturer of resistors). The thin film sensor slements have nominal resistance of 100 and 1000 Om.

Thermocouple and RTD heads are used for temperature probes to connect an outside cable.