2-19 Model
Y-Case Wireless Humidity & Temperature Transducer ZigBee 868 uses ZigBee interface with frequency 868 MHz to transfer data. The transducer operates by the following sequence: turning on, measuring, data transferring, turning off. In other words, the frequent measuring make quicker the batteries out.
The transducer goes with a magnetic holder and a mounting board, that may be mounted with screws.
A humidity & temperature sensor SHT31 is placed inside of transducer’s case. In addition, the transducer can connect one external analogue Pt1000 temperature probes with a cable and M8 connector.
Technical specifications of transducer
| Number of channels | 3, 4 |
| Available channel configuration | Internal humidity and temperature sensor and external temperature probe Internal humidity and temperature sensor and 2 external temperature probes |
| Output signal | ZigBee (868 MGz) |
| Wireless range | Up to 300 meters |
| Indication | OLED 0.96’ display |
| Number and type of the battery | 1 battery (½ AA 3,6 V 1Ah 14250) |
| Response time | 1 to 60 minutes |
| Built-in memory | Up to 100 records |
| Operating Temperature, °С | -30…60 |
Technical specifications of internal humidity and temperature sensor
| Sensor curve | SHT31 |
| Process temperature range, °С | -20…60 |
| Process humidity range, % | 0...100 |
Technical specifications of external temperature probe
| Nominal resistance | Pt1000 |
| Process temperature range, °С | -196...100, -50…100, -50…250, -50…500 |
| Connector | М8 (IP67) |
It uses high-contrast OLED display, that shows measurements receiving from all the channels, displays radio signal, battery charge, the serial number and net settings.
CS10600 Data Logger
Transducer operation requires the data logger CS10600 and the wireless Net Coordinator Y6.05-K-868.