2-02 Model
Y-Case Wireless Humidity & Temperature Transducer ZigBee 868 uses ZigBee interface with frequency 868 MHz to transfer data. The transducer operates by the following sequence: turning on, measuring, data transferring, turning off. In other words, the frequent measuring make quicker the batteries out.
The transducer has SHT31 built-in sensor of temperature and humidity, that is remoted out of the enclosure to avoid heat impact coming from the motherboard.
The transducer consists a free hex fitting М20х1,5 / G1/2 and a copper washer.
Technical specifications of transducer
| Number of channels | 2 |
| Available channel configuration | External humidity and temperature sensor |
| Output signal | ZigBee (868 MGz) |
| Wireless range | Up to 300 meters |
| Indication | OLED 0.96’ display |
| Number and type of the battery | 1 battery (½ AA 3,6 V 1Ah 14250) |
| Response time | 1 to 60 minutes |
| Built-in memory | Up to 100 records |
| Operating Temperature, °С | -30…60 |
Technical specifications of external humidity and temperature sensor
| Sensor Curve | SHT31 |
| Process temperature range, °С | -30…120 |
| Process humidity range, % | 0...100 |
| Sheath material | Steel 321, polyamide |
| Process connection size | M20x1,5 (by default) G1/2 (on order) |
| Length of the immersion part, mm | 80, 100, 120, 160, 200, 250 |
| Length of the remote part, mm | 70, 120 |
| Diameter of the immersion part, mm | Ø6 to Ø12 transition |
It uses high-contrast OLED display, that shows measurements receiving from all the channels, displays radio signal, battery charge, the serial number and net settings.
CS10600 Data Logger
Transducer operation requires the data logger CS10600 and the wireless Net Coordinator Y6.05-K-868.