2-17 Model
2-17 temperature transducer uses 4-20 mA analogue interface for data transfer. The probe connects to 4-20 mA line by 2 or 3 wired scheme depending on a model. It's recommended to use Shielded Twisted Pair (STP) cable for lines. 4-20 mA connection executes using sealed thread M12 connector with inner terminal block (no soldering).
2-17 model has an external analogue temperature probe, that connects using a sealed M8 threaded connector. It may be an RTD (Pt1000) or a thermocouple type K.
Technical specifications of transducer
| Number of channel | 1 |
| Available channel configuration | External temperature probe |
| Output Signal | Analogue, 4-20 mA |
| Indication | OLED 0.96’ display |
| Connector | М12FA / M12FD |
| Operating Temperature, °С | -30…60 |
Technical specifications of external temperature probe
| Type and Nominal Resistance | TSP (Pt1000) TXA (K) |
| Process temperature range, °С | -196…100, -50…100, -50…250, -50…500 (Pt1000) 0…250, 0…500, 0…850, 0…1250 (type K) |
| Process connection size | М8 (IP67) |
It uses high-contrast OLED display, that shows measurements receiving from all the channels. 2-17 model supplies in a set with a magnet and metal board with screws to mount.
Wire connection
