2-20 Model
2-20 temperature transducer uses 4-20 mA analogue interface for data transfer. The probe connects to 4-20 mA line by 2 or 3 wired scheme depending on a model. It's recommended to use Shielded Twisted Pair (STP) cable for lines. 4-20 mA connection executes using sealed thread M12 connector with inner terminal block (no soldering).
The probe supplies with indication or without.
Technical specifications of transducer
| Number of channel | 1 |
| Available channel configuration | External temperature probe |
| Output Signal | Analogue, 4-20 mA |
| Indication | OLED 0.96’ display |
| Connector | М12FA / M12FD |
| Operating Temperature, °С | -30…60 |
Technical specifications of external temperature probe
| Type and Nominal Resistance | ТМP116 |
| Process temperature range, °С | -30...60 |
| Sheath material | ABS plastic |
| Length of the immersion part, mm | 60 |
| Diameter of the immersion part, mm | Ø8 (immersion part) Ø12 (filter) |
It uses high-contrast OLED display, that shows measurements receiving from all the channels. 2-20 model supplies in a set with a magnet and metal board with screws to mount.
Wire connection
