1-3 Model
1-3 temperature transducer uses RS485 interface for data transfer. That interface allows to connect consequently up to 30 probes on a single cable line. The transducer connects to the RS485 net by the 5 wired scheme.
The transducer consists a sheath, a free hex fitting М20х1,5 / G1/2 and a copper washer.
Technical specifications
| Number of channel | 1 |
| Available channel configuration | External temperature probe |
| Output Signal | RS485, T-bus or Modbus RTU Protocols |
| Indication | OLED 0.96’ display |
| Connector | М12FA / M12FD |
| Operating Temperature, °С | -30…60 |
Technical specifications of the external temperature probe
| Type and Nominal Resistance | Pt1000 Type K |
| Process temperature range, °С | RTD: -196…100, -50…100, -50…250, -50…500 Thermocouple: 0...850 |
| Sheath material | Steel 321 |
| Process connection size | М20 х 1,5 or G1/2 |
| Length of the immersion part, mm | 80, 100, 120, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 1600, 2000 |
| Length of the remote part, mm | 70, 120 |
| Diameter of the immersion part, mm | By default - Ø6 (up to 500 mm), on order - Ø10 (over 500 mm) |
It uses high-contrast OLED display, that shows measurements receiving from all the channels, displays the serial number and RS485 net settings.
СР-06 Junction box
The transducer supplies along with CP-06 junction box with a power supply. The power supply and terminals are placed inside of CP-06 junction box to divide easily RS485 input and output cables.
Technical specifications of СР-06 junction box
| Input power supply | 12-24 V DC |
| Output power supply | 5 V DC |