1-14a Model
The temperature probe is designed as a thermowell with a hex fitting and a cable. It applies to measure temperature of ball bearings. It's recommended to order it with ME or TE PTFE cable to resist oil.
The protective spring is used to avoid kinking a cable.
Technical specifications
| Type and Nominal Resistance | Cu50 (ex-USSR), Cu100 (ex-USSR) Pt50 (ex-USSR), Pt100 (ex-USSR), Pt1000 10kNTC DS18B20 Type К Type L (ex- USSR) Type J |
| Number of sensors | 1, 2 |
| Accuracy | Class В (Cu50, Cu100) Classes АА, А, В (Pt50, Pt100, Pt1000) 1% (10kNTC) 0,5°C (DS18B20) 1, 2 (K, J) 2 (L) |
| RTD wire connection | 2, 3 wired |
| Junction type of thermocouples | Ungrounded |
| Process connection size | M6x1, M8x1 |
| Sheath material | AISI 321 (by default) AISI 316 (on order) |
| Process temperature range, °С | -50...150 (Cu50, Cu100) -100...250, -40....100, -50...250, -50...350 (Pt50, Pt100, Pt1000) -40...120, -20...200 (10kNTC) -30...100 (DS18B20) -40...250, -40...400 (thermocouple) |
| Thermal inertia, sec | 15...20 (RTD) 20...25 (thermocouples) |
| Pressure, MPa | 0,4 |
Dimensions
| Length of the immersion part, L, mm | 40, 60, 80 |
| Diameter of the immersion part, mm | Ø4, Ø6 |