2-15 Model
Y-Case Wireless Temperature Transducer 2-15 uses ZigBee interface with frequency 868 MHz for data transfer. The transducer works by the following sequence: turning on, measuring, data transferring, turning off. In other words, the frequent measuring make quicker the batteries out.
2-15 model can have two external Pt1000 temperature probes, that connect to the transducer by non-sealed threaded M5 connector. Built-in TMP116 temperature sensor is placed in transducer's housing.
2-15 model goes with magnet and mounting board with screws to mount it easily at the vertical surface.
Technical specifications
| Number of channel | 1, 3 |
| Available channel configuration | Internal temperature probe; 1 internal temperature sensor and 2 external temperature probes |
| Output Signal | ZigBee (868 MHz) |
| Wireless range | Up to 300 meters |
| Indication | OLED 0.96’ display |
| Number and type of the battery | 1 battery (½ AA 3,6 V 1Аh 14250) |
| Response time | 1 to 60 minutes |
| Built-in memory | Up to 100 records |
| Operating Temperature, °С | -30…60 |
Technical specifications of the external temperature probe
| Nominal Resistance | Pt1000 |
| Process temperature range, °С | -196…100, -50…100, -50…250, -50…500 |
| Connector | М5 (IP52) |
Technical specifications of the internal temperature sensor
| Type | TMP116 |
| Process temperature range, °С | -30…60 |
It uses high-contrast OLED display, that shows measurements receiving from all the channels, displays radio signal, battery charge, the serial number and net settings.
CS10600 Data Logger
Transducer operation require an Data Logger CS10600 and a wireless Net Coordinator Y6.05-K-868.