Special Temperature Probes

Note: to go to the page of a certain model of a probe, point the cursor on an image and click it.

Special temperature probes are designed to operate in certain technological processes. Usually, it's analogue units of foreign and local temperature transducers having various specialization.

3-7 model operates in plastic extruder. It can be made based on customer's schematics or a sample. The sensor of a probe is placed in the knife (L2), that stays in melt of plastic directly in a channel of extruding. The sensor can be Pt100, Pt1000, type J and type K.

3-12 model is designed to measure temperature of the gas flow with speed up to 300 meters per a second and temperature up to 1000°C. The thermocouple is designed based on 3 mm diameter MI cable.

3-13 and 3-14 models apply at various workshop equipment, and in injection molding machines and molds. The sheath of the probe compresses to the measuring surface using a spring and a bayonet nut. The depth of sheath immersion is adjustable by the spring as well.

3-16 model applies in KuASY injection molding machines. Its sheath has a conical shape for firm compression and better thermal inertia.

3-19b, 3-38а and 1-4r models apply to measure temperature of soil, substrate or compost. 3-38а, 1-4r models are made of stainless steel pipe 10x2 to ensure additional stiffness. Immersion part length can reach 1.5 meters. Probes have a cross-like handle to immerse it conveniently into compost. 3-19b, 3-38а and 1-4r models have a sensor (10kNTC, Pt100, Pt1000) as well as analogue of compost temperature probes manufactured by Fancom, Dalsem, AEM companies. Probes can be made with special cable in the polyurethane insulation or an polyamide industrial head  for more stiff exploitation conditions where is high humidity and ammonia gas.

3-56, 3-57 and 3-58 models are designed to measure temperature of the gap between wheels on gas pumping aggregates. The thermocouple is made of MI cable of 2.0 mm, 3.0 mm and 1.5...3.0 mm diameter.

3-64 and 3-65 models are designed to measure temperature of gas and liquid environment, which doesn't harm probe's sheath.

NOTE! If there is a need to calibrate / verify a probe in the calibration laboratory, please, mention it in the order application. This service is paid.